1. VACUUM FIRST
Vacuum the area thoroughly before using any chemical. Get loose dirt, crumbs, hair, and debris out first.
2. CHECK THE MATERIAL
Normal carpet / cloth seat → Carpet Bomber is okay.
Leather / Alcantara / delicate material → use Pol Star instead.
3. APPLY CLEANER LIGHTLY
For Carpet Bomber, use a light mist. Do not flood the carpet or seat. Product guidance commonly recommends roughly 5:1 for heavier cleaning and up to 8:1 for lighter cleaning.
4. LET IT DWELL
Let Carpet Bomber sit for about 3 minutes before agitation. Do not let it completely dry on the surface.
5. AGITATE
For durable carpet/floor mats, use a carpet brush or drill brush.
For cloth seats, use a softer brush or microfiber and less pressure.
Never drill-brush leather, Alcantara, headliners, or delicate fabric.
6. REMOVE THE DIRT
Because we do not use an extractor:
Blot/wipe with clean microfiber towels.
Keep flipping to a clean side.
Use a slightly damp microfiber to remove remaining residue.
Finish with a dry towel.
If the towel is still pulling heavy dirt, repeat the process once in that area rather than soaking the entire surface again.
Koch-Chemie specifically says Pol Star residue can be removed with a damp cloth or wet/dry vacuum, which is why this low-moisture method works with your current setup.
7. CHECK BEFORE MOVING ON
Look for:
Dirt still visible
Chemical residue
Uneven clean spots
Overly wet fabric
Remaining hair/debris
Fix it now.
8. LET IT DRY
Leave doors open when safe/practical. Do not put soaked floor mats back inside the vehicle.
STOP ADDING CHEMICAL IF THE MATERIAL IS GETTING WET.
More cleaner does not equal more cleaning.
If a stain will not safely come out after normal cleaning, document it instead of soaking the area.